Cmos Battery for HP Elitebook 8460p 8460w 8760w Probook 6460b 6475B 6470B 6570b

Description

The cmos bios battery being offered here are based on a 3 volt 210mah rating system board need, where what is required is a cable and 2 pin plug. The 2 pin plug is a
JST SHR-02V-S-B
1.0 mm type that is fitted to a receptacle on the system board for it's integration.
The renewal or replacement process might be something that can be somewhat challenging depending on the specific model of notebook, yet in most cases technical manuals will allow the scope of it's replacement process and allow owners to replace and renew the cmos battery.  If in doubt, please ask us to assist or redirect you to that source help.
Cmos Bios Clock battery (RTC Battery) are
HP Elitebook 8460p
HP Elitebook
8460w
HP Elitebook
8770w
HP
Probook 6460b
note:  aftermarket compatibles , not OEM)
as well as for
SONY VPCEG
that require a  cable and 2 pin
JST SHR-02V-S-B plug
.  This will work on other brands and models though it's not being listed for other variation model needs.
________________________________________________________________________________________________________
HP equipment, notebooks that came into the public market from 2008 forward, that have the motherboard bios provisions of
HP PC Hardware Diagnostics UEFI
to test the main components of your notebook computer.
This HP UEFI 2008 firmware has a internal diagnostic test that includes a battery health charge level, encompass the ability to alert the end user of the battery charge level associated with the internal battery (10.8v to 11.1v battery that subs for the ac/dc charger 100-240vac)
If you have a 601 battery error, contact HP,
or replace the internal battery not the rtc cmos battery.
HP motherboards nearly never have a charging circuit for the rtc cmos battery. Any attempt to charge a rtc battery can leak and explode due to internal heat pressure, that the rtc battery will never be subjected to in it's internal proper use.