Base Coat Activator increases adhesion durability of solvent basecoat, SMR-600-Q

Description

This sale is for a quart of SMR-600, basecoat activator.
SMR-600 is for all solvent based automotive basecoats.
SMR-600 will significantly increase basecoat adhesion, durability, flexibility and chip resistance.
The color coat (basecoat) in a paint job is the weak link. The large amount of pearls and metallics within automotive basecoats has pushed the PVC beyond an acceptable limit. The addition of basecoat activator will decrease the PVC, create crosslinking and eliminate basecoat split.
Basecoat without activator is like sandwiching a lacquer between two polyurethanes. Again, an expensive weak link.
By activating the basecoat, you can also repair the job later without swelling and lifting problems.
Eliminate peeling problems, especially in problem areas like bumpers.
Add 6% SMR-600 to "ready to spray" basecoat. Ex: One quart (32 oz.) of reduced basecoat needs 2 oz. of SMR-600.
Features:
- Enough activator for 2 gallons of mixed basecoat
- Increase Adhesion & Durability
- Eliminate peeling problems to primers and clearcoats
- Improve repairability
- No more basecoat split
- SMR-600 is cheap insurance
Health and Safety:
See Material Safety Data Sheet and labels for additional safety information and handling instructions.
The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels and MSDS’s of all components, since
the mixture will have the hazards of all its parts.
Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury.
Follow spray equipment manufacturer’s instructions to prevent personal injury or fire.
Provide adequate ventilation for health and fire hazard control.
Follow company, product MSDS and respirator manufacturer’s recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory
requirements.
Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS.
Always observe all applicable precautions and follow good safety and hygiene practices.